Configure ARG/US

Configure ARG/US

Before you can configure the ARG/US integration through Avianis, inquire to the ARG/US Product Support team for your operation's credentials. They are different from what is used to login into their website. 

ARG/US Product Support: 215-822-9308 or

Configure ARG/US

  1. Go to My Company > Global Settings > Integrations > ARG/US in the main navigation.

  2. Enter your username/password and at what time each day you would like the integration to run. 

  3. Designate if flight crew information is sent based on regulatory type. For example, if crew with the 135 regulatory designation on their personnel profile is required to sync select Part 135. 

  4. Set the applicable training item for proficiency check (293), instrument (297) check and line/sector (299) check. Helpful Hint: These should not be aircraft specific. See Quick Start Guide: Crew Records for more on creating the programs and training items. 

  5. Click save

    6. Access the Aircraft Model Mapping and associate the Avianis Aircraft Type to the         ARGUS Model Type Code. 

     7. Access the personnel tab and enable by personnel if their profile is to sync to               ARGUS.

     8. The information will automatically sync at the selected hour.

     9. To complete a manual sync test access any personnel's profile and select                      ARG/US in the upper-right hand corner of the profile.

Note: Be sure to create a minimum of one aircraft type log book entry (type should match the type rating in Avianis and ARGUS). This allows an operation to send the aircraft time in type.

Ref: I-W01

    • Related Articles

    • Syncing Information to ARG/US and Wyvern

      This article provides a table of the information that is sent to Wyvern and/or ARG/US when the integration is configured properly and the crew member / aircraft has been activated to sync. For how to setup the integrations, see the following ...
    • Configure CARICOM

      It is not required for an operation to reach out to CARICOM prior to submitting manifests through Avianis Setup CARICOM Account Go to Operations > Settings > eAPIS Accounts Click "Create New" Select the CARICOM account type Enter company information ...
    • Configure Wyvern

      To utilize the Wyvern integration with Avianis, first create dedicated Wyvern credentials for Avianis in Wyvern, then turn the Wyvern syncing on in Avianis. This article covers: How to configure the Wyvern integration for 1 certificate (List of info ...
    • Fuelerlinx: Configure Integration

      Are you an existing Fuelerlinx customer? If so, reach out to an Avianis Support team member and request the module be turned on. The direct email is Once turned on there will be a Fuelerlinx section on the main menu. This is ...
    • Configure trip stages

      This article will cover: how to configure trip stages how to set permissions for trip stages how to set trip stages change controls SET UP TRIP STAGES Operations > Settings > Configuration has an option to Change Controls by Trip Stage or Leg Status. ...